TILT KEY ROD AND FLOAT

APPLICATION
PID - 98 - MODEL BUOY
As a level tanks detector to command a motorcycle bomb in the filling or emptying of tanks.
DIP - 98 - STICK MODEL
As a level detector in bins, clogging gutters, or misalignment of sensor in air cargo and motion control mobile machinery.

ADVANTAGES
DIP - 98 - MODEL BUOY

PVC body float completely sealed and resistant to corrosion.
Can be installed in any liquid, even getting submerged when necessary.

DIP - 98 - STICK MODEL

Sensor unit encapsulated internally and spark-proof.
Support the unit in grommet suitable for this purpose, not causing fatigue of the cable conductor.
Can be installed in areas of suction or feed bins or tanks, because in areas of the electronics unit turbulence UET-DIP-98, makes it insensitive to these vibrations.

EXAMPLES OF APPLICATIONS

Storage silos with any type of raw materials, water tanks and wells for storage in general.

OPERATING PRINCIPLE
The tilt switch DIP-98 consists of a complete sensor and an electronic unit which is optional.
When the sensor undergoes an inclination of 12 ° (degrees) over the vertical in any direction, will perform its internal contacts, to inform the electronic unit, UET-DIP-98 the same after the time set in the pot will trigger a load which should be connected in series with the power.

TECHNICAL DATA
CANE AND BUOY DIP - 98

Operating Voltage: 440VAC Max
Max Current: 10 Amper
Tilt Angle: 12 ° (degrees)
Cable length: 2.5 meters
Material: Stainless Steel (Model Bat) - PVC (Model Buoy)

DIP - 98 - UET - With Electronics Unit.

Voltage: 90 to 220 VAC in series with the load.
Current: 500 mA.

PHYSICAL DIMENSIONS (Dimensions in mm)

Printable Version